• The FC – Safe Climb 24 system is one of the best options that could be used to reach heights for works that requires a scaffolding free wall like the core wall structures.
• Working on major projects necessitates that we take the highest measures for safety, and that extra care and attention be given to employees to prevent any mishaps in the middle of the heights. As a result, having a dependable formwork system in place that allows personnel to climb and work at tremendous heights should be our number one priority in effectively completing our projects.
• Our FC – Safe Climb 24 system is entirely Crane Dependent and has a 2.40 m wide platform, making it highly spacious for employees to traverse and work safely on the system. This characteristic significantly improves worker safety while simultaneously increasing labour productivity.
• A Scissor & spindle action mechanism is used in the FC – Safe Climb 24 to adjust and retract the panels. This procedure of shifting the location of the panels is rather simple yet efficient, allowing us to operate at a faster pace with fewer interruptions. Furthermore, the strike and refraction of the unit are up to 700mm, allowing ample room for personnel for working in the reinforcement area.

• The FC-Safe Climb 15 system is one of the best options that could be used to reach heights for works that requires a scaffolding free wall like the core wall structures.
• Working in these projects require us to follow the utmost precautions for safety and special care and attention should be given to workers to prevent any mis happenings in the middle of the heights. Hence, having a reliable system in formwork system in place that enables workers to climb and work at great heights should be our top most priority in successfully completing our projects.
• Our FC – Safe Climb 15 system has a 1.50 m wide platform thus being extremely spacious for the workers to maneuver along the system and work comfortably. This attribute increases the safety of the workers to a great extent and also increases the productivity of the work.
• A Scissor & spindle action mechanism is used in the FC – Safe Climb 15 to adjust and retract the panels. This is a relatively easy process to shift the position of the panels enabling us to work at a faster pace without any interruptions. Also, the strike and refraction of the unit are up to 400mm.

• The FC – ALU QUIK is a Grid-based Formwork system made up of pre-fabricated frames made of Aluminium hollow sectioned profiles, and the sheathing is made up of 12mm thick imported Birchply. Thus FC- ALU QUIK offers high finish quality and a higher number of usage cycles compared to a traditional formwork systems.
• The FC – ALU QUIK system is carefully designed to withstand a concrete pressure of 60 kN/sq.m which is more than necessary for any type of construction projects.
• The panels of the FC- ALU QUIK system are available in 1200, 1500, 2400, and 3000 mm in height and 300, 450, 600, and 750mm in width, enabling us to make formworks for any dimension of the columns, walls keeping the number of joints to a minimum value.
• All the components, joineries, Aluminium profiles and the sheathing Birchply are imported from high-quality manufacturers in Europe and or made meticulously in India with strict quality control and rigorous testing. Hence the FC – ALU QUIK system offers superior performance and long shelf life. Thus, the FC – ALU QUIK systems can be used for a number of repetitions in and across projects.

• Grid based adjustable modular system formwork flexible to work in 50mm grids.
• Pre fab Frames are made with steel profile with in built 12mm imported Birchply.
• Designed for up to 70kn/sqm concrete pressure capacity
• Available in 1200, 1500, 2400, 3000 mm in heights & 300, 450, 600, 750 mm in widths
• Versatile in vertical application – column can be used for wall, footings and vice versa
• Panels can be staked vertically and horizontally will enable to create required heights and widths
• Comes with standard accessories those are tested and verified

• The FC – TBM CUSTOM is a formwork system in which the structural members and the panel sheathing are made from Timber and Plywood, respectively. This system provides greater flexibility in forming complicated shapes. In addition, any corrections or revisions in design can be easily incorporated at the site.
• The site drawings for the FC – TBM CUSTOM system will be meticulously prepared by the Engineers at Form Connect, and all the panels will be designed and assembled as per the assembly drawings.
• As a general standard, the FC – TBM CUSTOM system is designed to withstand a concrete pressure of 50KN/sqm. Still, if the situation demands, designs can be made to accommodate higher levels of concrete stress. Thus, the FC – TBM CUSTOM is the perfect system to meet demanding specifications.
• Formconnect offers the client the flexibility to choose the sheathing material, their brand and the approved thickness of the FC – TBM CUSTOM formwork system based on their budget and requirements of the finished quality of the concrete.

Product Under Development

• Tableforms suitable for Flat slab application in projects like commercial segments
• Specially designed Table head that connects with Timber beams or Alu beams which are used as a primary & secondary members.
• Different heights (upto 5.50m) is possible with adjustable CT prop that works for different slab thickness
• These tables in different std & custom sizes will be designed to suit catered floor space.

• FormConnect’s FC – FLEX formwork system is one of the most reliable systems available in the market for tackling all your RC Floor formwork needs for residential and commercial buildings wherever slab & beam type floors
• The FC – FLEX system is most adopted in almost all conventional slab structures as it efficiently and elegantly handles the beam and slab joints.
• As a result, the FC – FLEX system is an entirely foolproof system offering you the best concrete finish, thus at times even making the need for plastering optional.
• The FC – FLEX system uses H-Beams, CT Prop, 4-Way Head, Beam Forming Head and a Tripod to assemble.
• Also, the Cuplock staging mechanism can be used for load-bearing in place of CT props enabling easy installation and for reaching heights above standard floor heights. Primarily it is used in commercial spaces where there is a need to cast double-height RC Floors. Other accessories can be retained.

• The FC – Heavy Duty Tower system utilizes a rigid tower-style staging mechanism to support the Formwork. This system is adapted for supporting heavy floors or slabs at higher altitudes, often mainly found in the infrastructure segment like the construction of Bridges, Culverts, Cut and Cover, Metro Underground Tunnels, Power Houses and manufacturing Industries.
• The FC – Heavy Duty Tower system is exceptionally rigid against lateral forces, and more robust materials are used for manufacturing the components of the system like the Foot plate, Tower Spindle, Diagonal Bracings, Basic Frames etc. Even the horizontal supporting sections or the decking members are made of High Strength Timber or Steel H-Sections per the work's requirements.
• FC – Heavy Duty Tower system uses a Basic Frame arrangement forming a heavy-duty tower with horizontal and diagonal bracings capable enough to undertake high bearing loads to support the formwork.
• The FC – Heavy Duty Tower system comes with standard frame sizes enabling you to provide support to any desired height. Also, the system comes with an inbuilt coupler type mechanism ensuring protection to the labours, thus increasing the system's overall safety.
• Using the Tower Spindles provided at the top and bottom of the Towers gives us the freedom to make the fine adjustments in heights based on the work.
• The Staging towers can also be used as scaffoldings to perform other finishing activities inside and outside the building, like plastering, painting etc.